• Mounts x1 Heusinkveld Sprint to the Simucube Baseplate
• Connects x1 Heusinkveld Sprint to Simucube ActivePedal

The post Simucube Baseplate Mount & ActivePedal Connector for Heusinkveld Sim Pedals Sprint appeared first on Simulation1Systems.

Please note that the Simucube ActivePedal Connector connects only one Heusinkveld Pedal, so if you use both the throttle and clutch pedals, you will need two of these connectors.

The post Simucube ActivePedal Connector for Heusinkveld Sim Pedals appeared first on Simulation1Systems.

With a 30 degree total angle adjustment, using 7 position adjustment slots, and the option to move the complete Rest Pedal assembly forwards or backwards using the slotted mounting pattern, you will be able to fully complement the ergonomics of your pedal set. Avoid accidentally touching a pedal when your left foot has nothing do to and rest it comfortably.

The mounting pattern of the Rest Pedal matches Heusinkveld Sprint and Ultimate pedals. An additional mounting pattern is provided for mounting onto an aluminium profile. Various bolts, nuts and T-nuts are provided with the Rest Pedal to assist with the installation.

The post Heusinkveld Rest Pedal appeared first on Simulation1Systems.

This Elastomer Kit is compatible with all versions of the Sim Pedals Sprint and the Sim Pedals Sprint – Team Redline Edition.

• This Elastomer Kit is an optional upgrade for Sim Pedals Sprint owners who currently run earlier spec brake rubbers. This Elastomer Upgrade kit contains our latest injection molded thermoset brake elastomers.
• This Elastomer Kit allows you to upgrade you Sim Pedals Sprint brake pedals to our latest injection molded thermoset brake elastomers.
• The feel of your brake pedal is critical for your simulator experience. Continuous development has resulted in these new thermoset brake elastomers, which were first introduced on our Sim Pedals Ultimate+. You now have the option to replace your early spec Sim Pedals Sprint brake rubbers with these new thermoset elastomers.
• Check before buying : Please note that these new elastomers may already be installed on your Sim Pedals Sprint. This is likely the case if you bought your Sim Pedals Sprint from December 2021 onwards. If your rubbers/elastomers have markings on the top indicating length and resistance (‘soft’ or ‘hard’), you already have the new specification installed. If there are no markings, you have the earlier spec.

ADVANTAGES

• The key advantages of using these new elastomers compared to the early spec rubbers are as follows:
  • A much more progressive brake feel. When applying force to the brake initially there will be more travel. Then the brake pedal feel gradually but very clearly stiffens.
  • Firmer bump and rebound characteristics. Especially on rebound (eg. when you decrease the force you put on the brake) a smaller decrease of brake force is required for the pedal to start moving back to its starting position.
  • Further improved durability. Extensive testing has shown that these new elastomers have a near zero failure rate and show no performance degradation even after 1 million cycles.
• We’d like to stress that this is an optional upgrade. Earlier spec brake rubbers will also serve you very well for years to come, albeit with slightly different performance characteristics.

INCLUDED PARTS

The Sim Pedals Sprint Elastomer Kit contains the following components:

• 1x 19mm hard elastomer.
• 1x 19mm soft elastomer.
• 1x 28mm soft elastomer.
• 1x 37mm soft elastomer.

The length and the hardness of the elastomer (soft/hard) is printed on the side of the elastomers.

All other components of the brake rubbers stack (such as the black discs and spacers) should be re-used from your original Sim Pedals Sprint brake.

COMPATIBILITY

• This Elastomer Kit is compatible with all versions of the Sim Pedals Sprint and the Sim Pedals Sprint – Team Redline Edition.
• Before purchasing the Elastomer Kit, please check whether you already have the new spec elastomers. If your rubbers/elastomers have markings on the side indicating length and resistance (‘soft’ or ‘hard’), you already have the new specification installed. If there are no markings, you have the earlier spec rubbers.
• The Elastomer Kit is not compatible with the following products:
  • (Classic) Sim Pedals Ultimate (eg. non-plus version): The inner diameter on these elastomers do not match the brake rod diameter on the classic Sim Pedals Ultimate. This kit also does not include the required black discs and spacers, damage to the elastomer will occur if you use the original metal discs. If you want to upgrade your classic Sim Pedals Ultimate, please see the Sim Pedals Ultimate Upgrade Kit.
  • Sim Pedals Pro: This kit is not designed to be compatible with the Sim Pedals Pro. Required hardware to install the Elastomer kit is supplied with the Sim Pedals Sprint only.

The post Heusinkveld Elastomer Kit – Sprint appeared first on Simulation1Systems.

These elastomers cannot be used to replace the green-white rubbers of the Classic Sim Pedals Ultimate.

Please note: This kit is not an upgrade. Your Ultimate+ brake pedal is already equipped with our latest injection molded thermoset brake elastomers. This can be verified by checking if the rubbers/elastomers have markings on the side indicating length and resistance (‘soft’ or ‘hard’).

Do you want to change your brake pedal resistance but you’ve misplaced the elastomers which were supplied with the original product? This kit can be used to replenish your set of elastomers for the Ultimate+ brake pedal as well as the elastomers in the Classic Sim Pedals Ultimate Upgrade Kit.

These elastomers cannot be used to replace the green-white rubbers of the Classic Sim Pedals Ultimate.

Please note: This kit is not an upgrade. Your Ultimate+ brake pedal is already equipped with our latest injection molded thermoset brake elastomers. This can be verified by checking if the rubbers/elastomers have markings on the side indicating length and resistance (‘soft’ or ‘hard’).

ADVANTAGES

• The key advantages of using these new elastomers compared to the early spec rubbers are as follows:
  • A much more progressive brake feel. When applying force to the brake initially there will be more travel. Then the brake pedal feel gradually but very clearly stiffens.
  • Firmer bump and rebound characteristics. Especially on rebound (eg. when you decrease the force you put on the brake) a smaller decrease of brake force is required for the pedal to start moving back to its starting position.
  • Further improved durability. Extensive testing has shown that these new elastomers have a near zero failure rate and show no performance degradation even after 1 million cycles.
• We’d like to stress that this is an optional upgrade. Earlier spec brake rubbers will also serve you very well for years to come, albeit with slightly different performance characteristics.

INCLUDED PARTS

• The Elastomer Kit for Ultimate+ pedals contains the following components:

  •  Hard elastomer in 19mm, 28mm and 37mm
  •  Soft elastomer in 19mm, 28mm and 37mm.

  All other components of the brake rubbers stack (such as the black discs and spacers) should be re-used from your original Ultimate+ brake.

COMPATIBILITY

• This Elastomer Kit is compatible with the our Ultimate+ pedals. This kit can also be used to replace/renew the elastomers of the Classic Sim Pedals Ultimate Upgrade Kit.

  The Elastomer Kit – Ultimate+ is not compatible with the following products:

  • (Classic) Sim Pedals Ultimate (eg. non-plus version): The inner diameter on these elastomers do not match the brake rod diameter on the classic Sim Pedals Ultimate.
  • Sim Pedals Pro: This kit is not designed to be compatible with the Sim Pedals Pro.

The post Heusinkveld Elastomer Kit – Ultimate+ appeared first on Simulation1Systems.

COMPONENTS

• The Ultimate Upgrade Kit is for owners of the classic Sim Pedals Ultimate who want to benefit of the main technical enhancements of the latest Sim Pedals Ultimate+.
• Included parts : The Sim Pedals Ultimate+ are both an aesthetical and technical upgrade over the classic Sim Pedals Ultimate. This Upgrade Kit contains the main technical upgrades.
• Aesthetical and minor technical differences will be present compared to the Sim Pedals Ultimate+ after upgrading. Please see the table below for an overview of included parts and upgrades.

COMPATIBILITY

• If you own the classic Sim Pedals Ultimate which has RJ-plugs to connect the pedals to the controller (sold between mid-2014 to 2021), you can use this upgrade kit.
• If you own the classic Sim Pedals Ultimate which has wire terminals on the controller (sold between late 2013 – early 2014), you must crimp RJ9 plugs (crimp tool and plugs not included in the Upgrade Kit) to the pedal wires before you can use the SmartControl controller. Contact support@heusinkveld.com for further guidance.
• If you own the Sim Pedals Ultimate+ (sold from July 2021 onwards), do not buy this Upgrade Kit. Your pedals already have all parts included in this Upgrade Kit.
• The Upgrade Kit is not compatible with other pedal series such as Sim Pedals Pro, Sim Pedals Sprint or Sim Pedals Racecenter.

MORE INFORMATION

• Within the Upgrade Kit, the new controller box and part of the rubber stack assembly are pre-assembled. You must still install/integrate these assemblies into your current Sim Pedals Ultimate pedal set.
• All other components come as individual parts. You have to do the installation of the new parts into the existing pedals yourself. This will take approximately 30 minutes. Tools to perform the installation are included in the Upgrade Kit.
• We provide printed schematics / exploded views with the Upgrade Kit. These schematics and an installation video giving further guidance on the installation can also be found in our Support section.
• For further information on brake pedal rubber stack settings, electronics and software you can use the manual for Sim Pedals Ultimate+ instead of the classic Sim Pedals Ultimate manual.

The post Heusinkveld Classic Ultimate Upgrade Kit appeared first on Simulation1Systems.

• The Black Edition styling has resulted in a significantly different appearance compared to the regular Sim Pedals Sprint. All metal profiles have a RAL9005 Black fine-structure powder coat or a bead blasted semi-gloss metallic look. Red styling cues can be seen on the metal coil springs.
• When operating the Sim Pedals Sprint near their maximum force capability, they need a very sturdy mount to your rig. If you want to mount your pedals to a baseplate first instead of mounting them individually, our Sim Pedals Sprint Baseplate is your product of choice.
• With the Sim Pedals Sprint being able to cope with high brake loads, a sturdy mount to your simulator rig is an absolute must. If you do not want mount the pedals directly to your rig but want to put them on a baseplate first, we offer an optional rigid mounting solution. The Sim Pedals Sprint baseplate allows for flexible positioning of individual pedals and also comes with an adjustable heel plate.
• With the brake of the Sim Pedals Sprint being able to cope with up to 65kg of force, standard pedal mounting plates of rigs often show excessive flex under these loads.
• This baseplate helps to create a solid platform to mount the pedals on your rig. The baseplate assembly consists of multiple elements: A pedal plate on which you mount the pedals, a height adjustable heel plate as well as two brackets which are used to secure the baseplate to an underlying frame.
• Mounting hardware is supplied to mount the pedals to the baseplate, as well as hardware to mount the baseplate to a 6mm thick underlying plate.

ADJUSTABILITY

• Pedal plate : The baseplate mounting points for the pedals are slots allowing for lateral adjustment of individual pedals. The dimensions of these lateral slots are 29mm for the brake and 24mm for the throttle and clutch. Every single pedal can also be adjusted 12,5mm backwards and forwards through the slots in the pedal feet themselves.
• Heel plate : The heel plate on the Sim Pedals Sprint Baseplate is height adjustable. You can either put it in the default position (0mm elevation), or use spacers to raise it. Two types of spacers (20mm and 40mm) are supplied in order to put the heel plate in an elevated position.

COMPATIBILITY

• This baseplate is only compatible with our Sim Pedals Sprint product.
• The mounting holes on the brackets are compatible with TM T3PA and T3PA Pro (235mm) pedal sets. Six mounting points on the brackets are provided in total, giving plenty of options mount the baseplate to aluminum profiles or create your own drilling template to install the baseplate to your rig.

The post Heusinkveld Sprint Baseplate Black appeared first on Simulation1Systems.

• When operating our Sim Pedals Ultimate+ near their maximum force capability, they need a very sturdy mount to your rig. If you want to mount your pedals to a baseplate first instead of mounting them individually, our Sim Pedals Ultimate+ Baseplate is your product of choice.
• With the Sim Pedals Ultimate+ being able to cope with the forces as experienced in real life racing cars, a sturdy mount to your simulator rig is an absolute must. If you do not want mount the pedals directly to your rig but want to put them on a baseplate first, we offer an optional rigid mounting solution. These baseplates are designed to show absolutely zero flex under load, while maintaining flexibility when it comes to positioning individual pedals.

ENGINEERING

• With the Sim Pedals Ultimate+ being able to cope with up to 140kg of force, standard rigs often show excessive flex under these loads. This baseplate helps to create a rigid mounting platform for your Sim Pedals Ultimate (please note that the Sim Pedals Sprint have their own baseplate).
• The baseplate assembly consists of multiple elements: The main baseplate on which you mount the pedals, as well as two brackets which create ground clearance for the pedal bolts and nuts and provide mounting space for the pedal controller. The main baseplate element is 10mm thick and will show zero flex under maximum load.
• We offer 2 color option: Black (fine structured powder coat) or Silver (bead blasted aluminum).

MOUNTING

• Depending on your rig, you have the option to use the straigth/parallel brackets or angled brackets. Both bracket types are supplied with every baseplate. The angled brackets are specifically designed for rigs which come with a proprietary pedal mounting plate which is inclined towards the seat.
• Our angled brackets tilt the Sim Pedals Ultimate Baseplate by 15 degrees. This offsets the default plate inclination from your rig creating a horizontal mounting platform for your Sim Pedals. If your rig has an angled pedal deck, this will also elevate the position of the pedals, enhancing ergonomics and resulting in a more realistic driving position where the pedal box and seat are at a more level position relative to eachother. The images show both types of brackets, as well as a schematic showing various seating positions and the appropriate bracket type.
• Both sets of brackets are compatible with G25/G27 mounting holes, allowing for easy installation on many available simulator rigs. Alternatively, the brackets can also be mounted to the side of the baseplate in a wider layout.
• Every baseplate comes with a set of bolts and nuts to attach the pedals to the baseplate and mount the baseplate to your rig. Next to mounting holes for your pedals, every baseplate also features slots to position the Sim Pedals USB-controller.

COMPATIBILITY

• The Sim Pedals Ultimate Baseplate is suitable for our Sim Pedals Ultimate+. It can also be used for the Sim Pedals Ultimate (non + version) and the Sim Pedals Pro.
• The Sim Pedals Ultimate+ Baseplate is NOT compatible with the Sim Pedals Sprint or Sim Pedals Racecentre. For the Sim Pedals Sprint baseplate, please click here.

The post Heusinkveld Ultimate+ Baseplate appeared first on Simulation1Systems.

Created to work flawlessly with the Simucube ActivePedal, popular rigs, and other third-party pedals.

Easily adjustable

Adjust heel rest height for perfect comfort

• The Simucube Baseplate is the perfect solution for those who want a seamless experience when mounting the Simucube ActivePedal and other third-party pedals.
• Created to work flawlessly with the Simucube ActivePedal, popular rigs, and other third-party pedals.
• Adjust heel rest height/angle for perfect comfort

PEDAL COMPATIBILITY

• Simucube ActivePedal
• Heusinkveld Ultimate+
• Simtrecs ProPedal GT
• Meca CUP 1
• VRS DirectForce Pro Pedals

The post Simucube Baseplate appeared first on Simulation1Systems.

*Purchase notes:

ADD-ON for the SR-P Pedals  Not compatible with SR-P Lite Pedals

The post Moza SR-P Accessory Kit appeared first on Simulation1Systems.